This mold is used to form ballistic into a Bow Block size (14x12x7).
Clear Ballistics manufactures this ballistic gelatin mold. The size of this mold is 14 inches in length, 12 inches in width, and is 7 inches in height (14L X 12 W X 7H). The height of mold is one inch taller to give lead way while pouring liquid ballistic gelatin to prevent spillage. This mold will hold 31lbs of ballistic gelatin. All molds are 20 gauge galvanized steel. All edges of the mold are rolled for stability and safety. All corners are weld for strength. The inner corners are round with high temperature silicon, which is heat resistant to 500F. Each mold is brushed on the exterior with high speed steel brush. Each mold has one-inch handles to provide strength and ease of transport while wearing protective gear.
One – Metal Mold (14L X 12W x 7H)
One – Set melting instructions per order
One – Calibration card
Size: 14 inches in length, 12 inches in width, and 7 inches in height (14L X 12W x 7H).
Total volume: 1176 Cubic Inches / 20.36 US quarts / 5.1 US gals Volume for ballistic gelatin: 1008 Cubic inches.
HOT GEL WILL CAUSE BURNS!, DO NOT TOUCH HOT GEL UNTIL COOLED! NEVER ALLOW CHILDREN TO TOUCH HOT GEL! GEL CAN COMBUST IF GEL TEMPERATURE EXCEEDS 250 ºF (121 ºC), REFER TO MATERIAL SAFETY DATA SHEET (MSDS) FOR MORE INFORMATION