This mold is used to form ballistic gelatin to the Full Swat (19x16x9) & Half Swat Block sizes(19x16x6).

PRODUCT SPECIFICATIONS
Clear Ballistics manufactures this ballistic gelatin mold. This mold size is 19 inches in length, 16 inches in width, and 10 inches in height (19L X 16W x 10H). The height of mold is one inch taller to give lead way while pouring liquid ballistic gelatin to prevent spillage. This mold will hold 90 lbs of ballistic gelatin. All molds are 20 gauge galvanized steel. All exterior edges of the mold are hemmed for stability and safety. All corners are weld for strength. The inner corners are round with high temperature silicon, which is heat resistant to 500F. Each mold is brushed on the exterior with high-speed steel brush. Each mold has one-inch handles to provide strength and ease of transport while wearing protective gear.

FEATURES
One – Metal mold (19L X 16W x 10H).
One – Set of instructions melting instructions per order.

PRODUCT SPECIFICATIONS
Size: 19 inches in length, 16 inches in width, and 10 inches in height (19L X 16W x 10H)
Total volume: 3040 Cubic Inches / 52.64 US quarts / 13.1 US gals Volume for ballistic gelatin: 2888 Cubic inches
20 gauge galvanized steel Brushed steel exterior with Welded corners

EXTENDED INFORMATION
HOT GEL WILL CAUSE BURNS! DO NOT TOUCH HOT GEL UNTIL COOLED!, NEVER ALLOW CHILDREN TO TOUCH HOT GEL! GEL CAN COMBUST IF GEL TEMPERATURE EXCEEDS 250 ºF (121 ºC), REFER TO MATERIAL SAFETY DATA SHEET (MSDS) FOR MORE INFORMATION