Looking to make a ballistic head? Joe Fit Head Mold is the next generation of making a ballistic testing heads. Joe Fit Head mold is the first-ever commercially available mold.
Joe Fit Head mold comes in two parts. The bottom of the base measures in at 7 inches wide by 7 ¾ long by 2 inches in height. The top of the base measures in at 6 inches wide by 6 inches long. All sides except the front have a ½ inch taper and the front has 1 ½ inch taper. Joe Fit Heat is 12 inches in height and the head is 5 ½ inches wide and from the tip of the nose to the back of the head it measures 9 ½ inches. The total weight of the Joe Fit Head mold is 5 Lbs. or 2.2 Kg.
About Our Ballistics Gelatin
Clear Ballistics ballistic gelatin is a modern day ballistic gelatin, is 100% synthetic, and contains no organic materials. It has taken the place of conventional ballistic gelatin, which is 100% organic, and completely temperature unstable. It is 100% clear as glass, odorless, reusable, temperatures stable (temperatures up to 240F), and mimics human tissue 100%. It is non-toxic. Our ballistic gelatin is mold able into any shape. Our ballistic gelatin does not mold or rot. Our ballistic gelatin does not require special storage. Our entire ballistic gelatin process is batch controlled. Clear Ballistics does calibration on the gelatin with each batch, and we following the FBI protocol for ballistics testing developed for ballistic testing of human tissue.
One – Head Mold (This is a two part mold)
One – Set melting instructions per order
One – Calibration card
Size: 8 inches in length, 6 inches in width, and 12inches in height (8L X 6W x 12H)
Clear Ballistics LLC does not guarantee ballistic gelatin will stop your projectile! HOT GEL WILL CAUSE BURNS!, DO NOT TOUCH HOT GEL UNTIL COOLED!, NEVER ALLOW CHILDREN TO TOUCH HOT GEL! GEL CAN COMBUST IF GEL TEMPERATURE EXCEEDS 250 ºF (121 ºC), REFER TO MATERIAL SAFETY DATA SHEET (MSDS) FOR MORE INFORMATION